cisco.meraki.organizations_alerts_profiles module -- Resource module for organizations _alerts _profiles

Note

This module is part of the cisco.meraki collection (version 2.18.2).

To install it, use: ansible-galaxy collection install cisco.meraki. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.meraki.organizations_alerts_profiles.

New in cisco.meraki 2.16.0

Synopsis

  • Manage operations create, update and delete of the resource organizations _alerts _profiles.

  • Create an organization-wide alert configuration.

  • Removes an organization-wide alert config.

  • Update an organization-wide alert config.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • meraki >= 2.4.9

  • python >= 3.5

Parameters

Parameter

Comments

alertCondition

dictionary

The conditions that determine if the alert triggers.

bit_rate_bps

integer

The threshold the metric must cross to be valid for alerting. Used only for WAN Utilization alerts.

duration

integer

The total duration in seconds that the threshold should be crossed before alerting.

interface

string

The uplink observed for the alert. Interface must be one of the following wan1, wan2, wan3, cellular.

jitter_ms

integer

The threshold the metric must cross to be valid for alerting. Used only for VoIP Jitter alerts.

latency_ms

integer

The threshold the metric must cross to be valid for alerting. Used only for WAN Latency alerts.

loss_ratio

float

The threshold the metric must cross to be valid for alerting. Used only for Packet Loss alerts.

mos

float

The threshold the metric must drop below to be valid for alerting. Used only for VoIP MOS alerts.

window

integer

The look back period in seconds for sensing the alert.

alertConfigId

string

AlertConfigId path parameter. Alert config ID.

description

string

User supplied description of the alert.

enabled

boolean

Is the alert config enabled.

Choices:

meraki_action_batch_retry_wait_time

integer

meraki_action_batch_retry_wait_time (integer), action batch concurrency error retry wait time

Default: :ansible-option-default:`60`

meraki_api_key

string / required

meraki_api_key (string), API key generated in dashboard; can also be set as an environment variable MERAKI_DASHBOARD_API_KEY

meraki_base_url

string

meraki_base_url (string), preceding all endpoint resources

Default: :ansible-option-default:`"https://api.meraki.com/api/v1"`

meraki_be_geo_id

string

meraki_be_geo_id (string), optional partner identifier for API usage tracking; can also be set as an environment variable BE_GEO_ID

Default: :ansible-option-default:`""`

meraki_caller

string

meraki_caller (string), optional identifier for API usage tracking; can also be set as an environment variable MERAKI_PYTHON_SDK_CALLER

Default: :ansible-option-default:`""`

meraki_certificate_path

string

meraki_certificate_path (string), path for TLS/SSL certificate verification if behind local proxy

Default: :ansible-option-default:`""`

meraki_inherit_logging_config

boolean

meraki_inherit_logging_config (boolean), Inherits your own logger instance

Choices:

meraki_log_file_prefix

string

meraki_log_file_prefix (string), log file name appended with date and timestamp

Default: :ansible-option-default:`"meraki\_api\_"`

meraki_log_path

string

log_path (string), path to output log; by default, working directory of script if not specified

Default: :ansible-option-default:`""`

meraki_maximum_retries

integer

meraki_maximum_retries (integer), retry up to this many times when encountering 429s or other server-side errors

Default: :ansible-option-default:`2`

meraki_nginx_429_retry_wait_time

integer

meraki_nginx_429_retry_wait_time (integer), Nginx 429 retry wait time

Default: :ansible-option-default:`60`

meraki_output_log

boolean

meraki_output_log (boolean), create an output log file?

Choices:

meraki_print_console

boolean

meraki_print_console (boolean), print logging output to console?

Choices:

meraki_requests_proxy

string

meraki_requests_proxy (string), proxy server and port, if needed, for HTTPS

Default: :ansible-option-default:`""`

meraki_retry_4xx_error

boolean

meraki_retry_4xx_error (boolean), retry if encountering other 4XX error (besides 429)?

Choices:

meraki_retry_4xx_error_wait_time

integer

meraki_retry_4xx_error_wait_time (integer), other 4XX error retry wait time

Default: :ansible-option-default:`60`

meraki_simulate

boolean

meraki_simulate (boolean), simulate POST/PUT/DELETE calls to prevent changes?

Choices:

meraki_single_request_timeout

integer

meraki_single_request_timeout (integer), maximum number of seconds for each API call

Default: :ansible-option-default:`60`

meraki_suppress_logging

boolean

meraki_suppress_logging (boolean), disable all logging? you're on your own then!

Choices:

meraki_use_iterator_for_get_pages

boolean

meraki_use_iterator_for_get_pages (boolean), list* methods will return an iterator with each object instead of a complete list with all items

Choices:

meraki_wait_on_rate_limit

boolean

meraki_wait_on_rate_limit (boolean), retry if 429 rate limit error encountered?

Choices:

networkTags

list / elements=string

Networks with these tags will be monitored for the alert.

organizationId

string

OrganizationId path parameter. Organization ID.

recipients

dictionary

List of recipients that will recieve the alert.

emails

list / elements=string

A list of emails that will receive information about the alert.

httpServerIds

list / elements=string

A list base64 encoded urls of webhook endpoints that will receive information about the alert.

type

string

The alert type.

Notes

Note

  • SDK Method used are organizations.Organizations.create_organization_alerts_profile, organizations.Organizations.delete_organization_alerts_profile, organizations.Organizations.update_organization_alerts_profile,

  • Paths used are post /organizations/{organizationId}/alerts/profiles, delete /organizations/{organizationId}/alerts/profiles/{alertConfigId}, put /organizations/{organizationId}/alerts/profiles/{alertConfigId},

  • Does not support check_mode

  • The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

  • The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

See Also

See also

Cisco Meraki documentation for organizations createOrganizationAlertsProfile

Complete reference of the createOrganizationAlertsProfile API.

Cisco Meraki documentation for organizations deleteOrganizationAlertsProfile

Complete reference of the deleteOrganizationAlertsProfile API.

Cisco Meraki documentation for organizations updateOrganizationAlertsProfile

Complete reference of the updateOrganizationAlertsProfile API.

Examples

- name: Create
  cisco.meraki.organizations_alerts_profiles:
    meraki_api_key: "{{meraki_api_key}}"
    meraki_base_url: "{{meraki_base_url}}"
    meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
    meraki_certificate_path: "{{meraki_certificate_path}}"
    meraki_requests_proxy: "{{meraki_requests_proxy}}"
    meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
    meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
    meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
    meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
    meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
    meraki_maximum_retries: "{{meraki_maximum_retries}}"
    meraki_output_log: "{{meraki_output_log}}"
    meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
    meraki_log_path: "{{meraki_log_path}}"
    meraki_print_console: "{{meraki_print_console}}"
    meraki_suppress_logging: "{{meraki_suppress_logging}}"
    meraki_simulate: "{{meraki_simulate}}"
    meraki_be_geo_id: "{{meraki_be_geo_id}}"
    meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
    meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
    state: present
    alertCondition:
      bit_rate_bps: 10000
      duration: 60
      interface: wan1
      jitter_ms: 100
      latency_ms: 100
      loss_ratio: 0.1
      mos: 3.5
      window: 600
    description: WAN 1 high utilization
    networkTags:
    - tag1
    - tag2
    organizationId: string
    recipients:
      emails:
      - admin@example.org
      httpServerIds:
      - aHR0cHM6Ly93d3cuZXhhbXBsZS5jb20vcGF0aA==
    type: wanUtilization

- name: Delete by id
  cisco.meraki.organizations_alerts_profiles:
    meraki_api_key: "{{meraki_api_key}}"
    meraki_base_url: "{{meraki_base_url}}"
    meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
    meraki_certificate_path: "{{meraki_certificate_path}}"
    meraki_requests_proxy: "{{meraki_requests_proxy}}"
    meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
    meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
    meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
    meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
    meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
    meraki_maximum_retries: "{{meraki_maximum_retries}}"
    meraki_output_log: "{{meraki_output_log}}"
    meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
    meraki_log_path: "{{meraki_log_path}}"
    meraki_print_console: "{{meraki_print_console}}"
    meraki_suppress_logging: "{{meraki_suppress_logging}}"
    meraki_simulate: "{{meraki_simulate}}"
    meraki_be_geo_id: "{{meraki_be_geo_id}}"
    meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
    meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
    state: absent
    alertConfigId: string
    organizationId: string

- name: Update by id
  cisco.meraki.organizations_alerts_profiles:
    meraki_api_key: "{{meraki_api_key}}"
    meraki_base_url: "{{meraki_base_url}}"
    meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
    meraki_certificate_path: "{{meraki_certificate_path}}"
    meraki_requests_proxy: "{{meraki_requests_proxy}}"
    meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
    meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
    meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
    meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
    meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
    meraki_maximum_retries: "{{meraki_maximum_retries}}"
    meraki_output_log: "{{meraki_output_log}}"
    meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
    meraki_log_path: "{{meraki_log_path}}"
    meraki_print_console: "{{meraki_print_console}}"
    meraki_suppress_logging: "{{meraki_suppress_logging}}"
    meraki_simulate: "{{meraki_simulate}}"
    meraki_be_geo_id: "{{meraki_be_geo_id}}"
    meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
    meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
    state: present
    alertCondition:
      bit_rate_bps: 10000
      duration: 60
      interface: wan1
      jitter_ms: 100
      latency_ms: 100
      loss_ratio: 0.1
      mos: 3.5
      window: 600
    alertConfigId: string
    description: WAN 1 high utilization
    enabled: true
    networkTags:
    - tag1
    - tag2
    organizationId: string
    recipients:
      emails:
      - admin@example.org
      httpServerIds:
      - aHR0cHM6Ly93d3cuZXhhbXBsZS5jb20vcGF0aA==
    type: wanUtilization

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

meraki_response

dictionary

A dictionary or list with the response returned by the Cisco Meraki Python SDK

Returned: always

Sample: :ansible-rv-sample-value:`{"alertCondition": {"bit\_rate\_bps": 0, "duration": 0, "interface": "string", "window": 0}, "description": "string", "enabled": true, "id": "string", "networkTags": ["string"], "recipients": {"emails": ["string"], "httpServerIds": ["string"]}, "type": "string"}`

Authors

  • Francisco Munoz (@fmunoz)