cisco.meraki.networks_wireless_rf_profiles module -- Resource module for networks _wireless _rfprofiles
Note
This module is part of the cisco.meraki collection (version 2.18.2).
To install it, use: ansible-galaxy collection install cisco.meraki.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.meraki.networks_wireless_rf_profiles.
New in cisco.meraki 2.16.0
Synopsis
Manage operations create, update and delete of the resource networks _wireless _rfprofiles.
Creates new RF profile for this network.
Delete a RF Profile.
Updates specified RF profile for this network.
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
meraki >= 2.4.9
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
Settings that will be enabled if selectionType is set to 'ap'. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. Defaults to dual. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4", "5", "6", "disabled". |
|
Steers client to most open band. Can be either true or false. Defaults to true. Choices: |
|
Band selection can be set to either 'ssid' or 'ap'. This param is required on creation. |
|
Steers client to best available access point. Can be either true or false. Defaults to true. Choices: |
|
Settings related to 5Ghz band. |
|
Sets channel width (MHz) for 5Ghz band. Can be one of 'auto', '20', '40' or '80'. Defaults to auto. |
|
Sets max power (dBm) of 5Ghz band. Can be integer between 2 and 30. Defaults to 30. |
|
Sets min bitrate (Mbps) of 5Ghz band. Can be one of '6', '9', '12', '18', '24', '36', '48' or '54'. Defaults to 12. |
|
Sets min power (dBm) of 5Ghz band. Can be integer between 2 and 30. Defaults to 8. |
|
The RX-SOP level controls the sensitivity of the radio. It is strongly recommended to use RX-SOP only after consulting a wireless expert. RX-SOP can be configured in the range of -65 to -95 (dBm). A value of null will reset this to the default. |
|
Sets valid auto channels for 5Ghz band. Can be one of '36', '40', '44', '48', '52', '56', '60', '64', '100', '104', '108', '112', '116', '120', '124', '128', '132', '136', '140', '144', '149', '153', '157', '161' or '165'.Defaults to 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165. |
|
Flex radio settings. |
|
Flex radios by model. |
|
Band to use for each flex radio. For example, '6' will set the AP's first flex radio to 6 GHz. |
|
Model of the AP. |
|
meraki_action_batch_retry_wait_time (integer), action batch concurrency error retry wait time Default: :ansible-option-default:`60` |
|
meraki_api_key (string), API key generated in dashboard; can also be set as an environment variable MERAKI_DASHBOARD_API_KEY |
|
meraki_base_url (string), preceding all endpoint resources Default: :ansible-option-default:`"https://api.meraki.com/api/v1"` |
|
meraki_be_geo_id (string), optional partner identifier for API usage tracking; can also be set as an environment variable BE_GEO_ID Default: :ansible-option-default:`""` |
|
meraki_caller (string), optional identifier for API usage tracking; can also be set as an environment variable MERAKI_PYTHON_SDK_CALLER Default: :ansible-option-default:`""` |
|
meraki_certificate_path (string), path for TLS/SSL certificate verification if behind local proxy Default: :ansible-option-default:`""` |
|
meraki_inherit_logging_config (boolean), Inherits your own logger instance Choices: |
|
meraki_log_file_prefix (string), log file name appended with date and timestamp |
|
log_path (string), path to output log; by default, working directory of script if not specified Default: :ansible-option-default:`""` |
|
meraki_maximum_retries (integer), retry up to this many times when encountering 429s or other server-side errors Default: :ansible-option-default:`2` |
|
meraki_nginx_429_retry_wait_time (integer), Nginx 429 retry wait time Default: :ansible-option-default:`60` |
|
meraki_output_log (boolean), create an output log file? Choices: |
|
meraki_print_console (boolean), print logging output to console? Choices: |
|
meraki_requests_proxy (string), proxy server and port, if needed, for HTTPS Default: :ansible-option-default:`""` |
|
meraki_retry_4xx_error (boolean), retry if encountering other 4XX error (besides 429)? Choices: |
|
meraki_retry_4xx_error_wait_time (integer), other 4XX error retry wait time Default: :ansible-option-default:`60` |
|
meraki_simulate (boolean), simulate POST/PUT/DELETE calls to prevent changes? Choices: |
|
meraki_single_request_timeout (integer), maximum number of seconds for each API call Default: :ansible-option-default:`60` |
|
meraki_suppress_logging (boolean), disable all logging? you're on your own then! Choices: |
|
meraki_use_iterator_for_get_pages (boolean), list* methods will return an iterator with each object instead of a complete list with all items Choices: |
|
meraki_wait_on_rate_limit (boolean), retry if 429 rate limit error encountered? Choices: |
|
Minimum bitrate can be set to either 'band' or 'ssid'. Defaults to band. |
|
The name of the new profile. Must be unique. This param is required on creation. |
|
NetworkId path parameter. Network ID. |
|
Per-SSID radio settings by number. |
|
Settings for SSID 0. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4", "5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 1. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4", "5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 10. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4", "5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 11. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4", "5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 12. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4", "5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 13. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 14. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 2. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 3. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 4. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 5. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 6. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 7. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 8. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
Settings for SSID 9. |
|
Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. |
|
Settings related to all bands. |
|
List of enabled bands. Can include "2.4","5", "6", "disabled". |
|
Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false. Choices: |
|
Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. |
|
RfProfileId path parameter. Rf profile ID. |
|
Settings related to 6Ghz band. Only applicable to networks with 6Ghz capable APs. |
|
Sets channel width (MHz) for 6Ghz band. Can be one of '0', '20', '40', '80' or '160'. Defaults to 0. |
|
Sets max power (dBm) of 6Ghz band. Can be integer between 2 and 30. Defaults to 30. |
|
Sets min bitrate (Mbps) of 6Ghz band. Can be one of '6', '9', '12', '18', '24', '36', '48' or '54'. Defaults to 12. |
|
Sets min power (dBm) of 6Ghz band. Can be integer between 2 and 30. Defaults to 8. |
|
The RX-SOP level controls the sensitivity of the radio. It is strongly recommended to use RX-SOP only after consulting a wireless expert. RX-SOP can be configured in the range of -65 to -95 (dBm). A value of null will reset this to the default. |
|
Sets valid auto channels for 6Ghz band. Can be one of '1', '5', '9', '13', '17', '21', '25', '29', '33', '37', '41', '45', '49', '53', '57', '61', '65', '69', '73', '77', '81', '85', '89', '93', '97', '101', '105', '109', '113', '117', '121', '125', '129', '133', '137', '141', '145', '149', '153', '157', '161', '165', '169', '173', '177', '181', '185', '189', '193', '197', '201', '205', '209', '213', '217', '221', '225', '229' or '233'.Defaults to 1, 5, 9, 13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 53, 57, 61, 65, 69, 73, 77, 81, 85, 89, 93, 97, 101, 105, 109, 113, 117, 121, 125, 129, 133, 137, 141, 145, 149, 153, 157, 161, 165, 169, 173, 177, 181, 185, 189, 193, 197, 201, 205, 209, 213, 217, 221, 225, 229, 233. |
|
Settings related to radio transmission. |
|
Toggle for radio transmission. When false, radios will not transmit at all. Choices: |
|
Settings related to 2.4Ghz band. |
|
Determines whether ax radio on 2.4Ghz band is on or off. Can be either true or false. If false, we highly recommend disabling band steering. Defaults to true. Choices: |
|
Sets max power (dBm) of 2.4Ghz band. Can be integer between 2 and 30. Defaults to 30. |
|
Sets min bitrate (Mbps) of 2.4Ghz band. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. Defaults to 11. |
|
Sets min power (dBm) of 2.4Ghz band. Can be integer between 2 and 30. Defaults to 5. |
|
The RX-SOP level controls the sensitivity of the radio. It is strongly recommended to use RX-SOP only after consulting a wireless expert. RX-SOP can be configured in the range of -65 to -95 (dBm). A value of null will reset this to the default. |
|
Sets valid auto channels for 2.4Ghz band. Can be one of '1', '6' or '11'. Defaults to 1, 6, 11. |
Notes
Note
SDK Method used are wireless.Wireless.create_network_wireless_rf_profile, wireless.Wireless.delete_network_wireless_rf_profile, wireless.Wireless.update_network_wireless_rf_profile,
Paths used are post /networks/{networkId}/wireless/rfProfiles, delete /networks/{networkId}/wireless/rfProfiles/{rfProfileId}, put /networks/{networkId}/wireless/rfProfiles/{rfProfileId},
Does not support
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
See Also
See also
- Cisco Meraki documentation for wireless createNetworkWirelessRfProfile
Complete reference of the createNetworkWirelessRfProfile API.
- Cisco Meraki documentation for wireless deleteNetworkWirelessRfProfile
Complete reference of the deleteNetworkWirelessRfProfile API.
- Cisco Meraki documentation for wireless updateNetworkWirelessRfProfile
Complete reference of the updateNetworkWirelessRfProfile API.
Examples
- name: Create
cisco.meraki.networks_wireless_rf_profiles:
meraki_api_key: "{{meraki_api_key}}"
meraki_base_url: "{{meraki_base_url}}"
meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
meraki_certificate_path: "{{meraki_certificate_path}}"
meraki_requests_proxy: "{{meraki_requests_proxy}}"
meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
meraki_maximum_retries: "{{meraki_maximum_retries}}"
meraki_output_log: "{{meraki_output_log}}"
meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
meraki_log_path: "{{meraki_log_path}}"
meraki_print_console: "{{meraki_print_console}}"
meraki_suppress_logging: "{{meraki_suppress_logging}}"
meraki_simulate: "{{meraki_simulate}}"
meraki_be_geo_id: "{{meraki_be_geo_id}}"
meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
state: present
apBandSettings:
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
bandSelectionType: ap
clientBalancingEnabled: true
fiveGhzSettings:
channelWidth: auto
maxPower: 30
minBitrate: 12
minPower: 8
rxsop: -95
validAutoChannels:
- 36
- 40
- 44
- 48
- 52
- 56
- 60
- 64
- 100
- 104
- 108
- 112
- 116
- 120
- 124
- 128
- 132
- 136
- 140
- 144
- 149
- 153
- 157
- 161
- 165
flexRadios:
byModel:
- bands:
- '5'
model: MR34
minBitrateType: band
name: Main Office
networkId: string
perSsidSettings:
'0':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'1':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'10':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'11':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'12':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'13':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'14':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'2':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'3':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'4':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'5':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'6':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'7':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'8':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'9':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
sixGhzSettings:
channelWidth: auto
maxPower: 30
minBitrate: 12
minPower: 8
rxsop: -95
validAutoChannels:
- 1
- 5
- 9
- 13
- 17
- 21
- 25
- 29
- 33
- 37
- 41
- 45
- 49
- 53
- 57
- 61
- 65
- 69
- 73
- 77
- 81
- 85
- 89
- 93
- 97
- 101
- 105
- 109
- 113
- 117
- 121
- 125
- 129
- 133
- 137
- 141
- 145
- 149
- 153
- 157
- 161
- 165
- 169
- 173
- 177
- 181
- 185
- 189
- 193
- 197
- 201
- 205
- 209
- 213
- 217
- 221
- 225
- 229
- 233
transmission:
enabled: true
twoFourGhzSettings:
axEnabled: true
maxPower: 30
minBitrate: 11.0
minPower: 5
rxsop: -95
validAutoChannels:
- 1
- 6
- 11
- name: Delete by id
cisco.meraki.networks_wireless_rf_profiles:
meraki_api_key: "{{meraki_api_key}}"
meraki_base_url: "{{meraki_base_url}}"
meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
meraki_certificate_path: "{{meraki_certificate_path}}"
meraki_requests_proxy: "{{meraki_requests_proxy}}"
meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
meraki_maximum_retries: "{{meraki_maximum_retries}}"
meraki_output_log: "{{meraki_output_log}}"
meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
meraki_log_path: "{{meraki_log_path}}"
meraki_print_console: "{{meraki_print_console}}"
meraki_suppress_logging: "{{meraki_suppress_logging}}"
meraki_simulate: "{{meraki_simulate}}"
meraki_be_geo_id: "{{meraki_be_geo_id}}"
meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
state: absent
networkId: string
rfProfileId: string
- name: Update by id
cisco.meraki.networks_wireless_rf_profiles:
meraki_api_key: "{{meraki_api_key}}"
meraki_base_url: "{{meraki_base_url}}"
meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
meraki_certificate_path: "{{meraki_certificate_path}}"
meraki_requests_proxy: "{{meraki_requests_proxy}}"
meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
meraki_maximum_retries: "{{meraki_maximum_retries}}"
meraki_output_log: "{{meraki_output_log}}"
meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
meraki_log_path: "{{meraki_log_path}}"
meraki_print_console: "{{meraki_print_console}}"
meraki_suppress_logging: "{{meraki_suppress_logging}}"
meraki_simulate: "{{meraki_simulate}}"
meraki_be_geo_id: "{{meraki_be_geo_id}}"
meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
state: present
apBandSettings:
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
bandSelectionType: ap
clientBalancingEnabled: true
fiveGhzSettings:
channelWidth: auto
maxPower: 30
minBitrate: 12
minPower: 8
rxsop: -95
validAutoChannels:
- 36
- 40
- 44
- 48
- 52
- 56
- 60
- 64
- 100
- 104
- 108
- 112
- 116
- 120
- 124
- 128
- 132
- 136
- 140
- 144
- 149
- 153
- 157
- 161
- 165
flexRadios:
byModel:
- bands:
- '5'
model: MR34
minBitrateType: band
name: '1234'
networkId: string
perSsidSettings:
'0':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'1':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'10':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'11':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'12':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'13':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'14':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'2':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'3':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'4':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'5':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'6':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'7':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'8':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
'9':
bandOperationMode: dual
bandSteeringEnabled: true
bands:
enabled:
- '2.4'
- '5'
minBitrate: 11.0
rfProfileId: string
sixGhzSettings:
channelWidth: auto
maxPower: 30
minBitrate: 12
minPower: 8
rxsop: -95
validAutoChannels:
- 1
- 5
- 9
- 13
- 17
- 21
- 25
- 29
- 33
- 37
- 41
- 45
- 49
- 53
- 57
- 61
- 65
- 69
- 73
- 77
- 81
- 85
- 89
- 93
- 97
- 101
- 105
- 109
- 113
- 117
- 121
- 125
- 129
- 133
- 137
- 141
- 145
- 149
- 153
- 157
- 161
- 165
- 169
- 173
- 177
- 181
- 185
- 189
- 193
- 197
- 201
- 205
- 209
- 213
- 217
- 221
- 225
- 229
- 233
transmission:
enabled: true
twoFourGhzSettings:
axEnabled: true
maxPower: 30
minBitrate: 11.0
minPower: 5
rxsop: -95
validAutoChannels:
- 1
- 6
- 11
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|