cisco.meraki.networks_wireless_rf_profiles module -- Resource module for networks _wireless _rfprofiles

Note

This module is part of the cisco.meraki collection (version 2.18.2).

To install it, use: ansible-galaxy collection install cisco.meraki. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.meraki.networks_wireless_rf_profiles.

New in cisco.meraki 2.16.0

Synopsis

  • Manage operations create, update and delete of the resource networks _wireless _rfprofiles.

  • Creates new RF profile for this network.

  • Delete a RF Profile.

  • Updates specified RF profile for this network.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • meraki >= 2.4.9

  • python >= 3.5

Parameters

Parameter

Comments

apBandSettings

dictionary

Settings that will be enabled if selectionType is set to 'ap'.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'. Defaults to dual.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4", "5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band. Can be either true or false. Defaults to true.

Choices:

bandSelectionType

string

Band selection can be set to either 'ssid' or 'ap'. This param is required on creation.

clientBalancingEnabled

boolean

Steers client to best available access point. Can be either true or false. Defaults to true.

Choices:

fiveGhzSettings

dictionary

Settings related to 5Ghz band.

channelWidth

string

Sets channel width (MHz) for 5Ghz band. Can be one of 'auto', '20', '40' or '80'. Defaults to auto.

maxPower

integer

Sets max power (dBm) of 5Ghz band. Can be integer between 2 and 30. Defaults to 30.

minBitrate

integer

Sets min bitrate (Mbps) of 5Ghz band. Can be one of '6', '9', '12', '18', '24', '36', '48' or '54'. Defaults to 12.

minPower

integer

Sets min power (dBm) of 5Ghz band. Can be integer between 2 and 30. Defaults to 8.

rxsop

integer

The RX-SOP level controls the sensitivity of the radio. It is strongly recommended to use RX-SOP only after consulting a wireless expert. RX-SOP can be configured in the range of -65 to -95 (dBm). A value of null will reset this to the default.

validAutoChannels

list / elements=integer

Sets valid auto channels for 5Ghz band. Can be one of '36', '40', '44', '48', '52', '56', '60', '64', '100', '104', '108', '112', '116', '120', '124', '128', '132', '136', '140', '144', '149', '153', '157', '161' or '165'.Defaults to 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165.

flexRadios

dictionary

Flex radio settings.

byModel

list / elements=dictionary

Flex radios by model.

bands

list / elements=string

Band to use for each flex radio. For example, '6' will set the AP's first flex radio to 6 GHz.

model

string

Model of the AP.

meraki_action_batch_retry_wait_time

integer

meraki_action_batch_retry_wait_time (integer), action batch concurrency error retry wait time

Default: :ansible-option-default:`60`

meraki_api_key

string / required

meraki_api_key (string), API key generated in dashboard; can also be set as an environment variable MERAKI_DASHBOARD_API_KEY

meraki_base_url

string

meraki_base_url (string), preceding all endpoint resources

Default: :ansible-option-default:`"https://api.meraki.com/api/v1"`

meraki_be_geo_id

string

meraki_be_geo_id (string), optional partner identifier for API usage tracking; can also be set as an environment variable BE_GEO_ID

Default: :ansible-option-default:`""`

meraki_caller

string

meraki_caller (string), optional identifier for API usage tracking; can also be set as an environment variable MERAKI_PYTHON_SDK_CALLER

Default: :ansible-option-default:`""`

meraki_certificate_path

string

meraki_certificate_path (string), path for TLS/SSL certificate verification if behind local proxy

Default: :ansible-option-default:`""`

meraki_inherit_logging_config

boolean

meraki_inherit_logging_config (boolean), Inherits your own logger instance

Choices:

meraki_log_file_prefix

string

meraki_log_file_prefix (string), log file name appended with date and timestamp

Default: :ansible-option-default:`"meraki\_api\_"`

meraki_log_path

string

log_path (string), path to output log; by default, working directory of script if not specified

Default: :ansible-option-default:`""`

meraki_maximum_retries

integer

meraki_maximum_retries (integer), retry up to this many times when encountering 429s or other server-side errors

Default: :ansible-option-default:`2`

meraki_nginx_429_retry_wait_time

integer

meraki_nginx_429_retry_wait_time (integer), Nginx 429 retry wait time

Default: :ansible-option-default:`60`

meraki_output_log

boolean

meraki_output_log (boolean), create an output log file?

Choices:

meraki_print_console

boolean

meraki_print_console (boolean), print logging output to console?

Choices:

meraki_requests_proxy

string

meraki_requests_proxy (string), proxy server and port, if needed, for HTTPS

Default: :ansible-option-default:`""`

meraki_retry_4xx_error

boolean

meraki_retry_4xx_error (boolean), retry if encountering other 4XX error (besides 429)?

Choices:

meraki_retry_4xx_error_wait_time

integer

meraki_retry_4xx_error_wait_time (integer), other 4XX error retry wait time

Default: :ansible-option-default:`60`

meraki_simulate

boolean

meraki_simulate (boolean), simulate POST/PUT/DELETE calls to prevent changes?

Choices:

meraki_single_request_timeout

integer

meraki_single_request_timeout (integer), maximum number of seconds for each API call

Default: :ansible-option-default:`60`

meraki_suppress_logging

boolean

meraki_suppress_logging (boolean), disable all logging? you're on your own then!

Choices:

meraki_use_iterator_for_get_pages

boolean

meraki_use_iterator_for_get_pages (boolean), list* methods will return an iterator with each object instead of a complete list with all items

Choices:

meraki_wait_on_rate_limit

boolean

meraki_wait_on_rate_limit (boolean), retry if 429 rate limit error encountered?

Choices:

minBitrateType

string

Minimum bitrate can be set to either 'band' or 'ssid'. Defaults to band.

name

string

The name of the new profile. Must be unique. This param is required on creation.

networkId

string

NetworkId path parameter. Network ID.

perSsidSettings

dictionary

Per-SSID radio settings by number.

0

dictionary

Settings for SSID 0.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4", "5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

1

dictionary

Settings for SSID 1.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4", "5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

10

dictionary

Settings for SSID 10.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4", "5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

11

dictionary

Settings for SSID 11.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4", "5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

12

dictionary

Settings for SSID 12.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4", "5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

13

dictionary

Settings for SSID 13.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

14

dictionary

Settings for SSID 14.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

2

dictionary

Settings for SSID 2.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

3

dictionary

Settings for SSID 3.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

4

dictionary

Settings for SSID 4.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

5

dictionary

Settings for SSID 5.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

6

dictionary

Settings for SSID 6.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

7

dictionary

Settings for SSID 7.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

8

dictionary

Settings for SSID 8.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

9

dictionary

Settings for SSID 9.

bandOperationMode

string

Choice between 'dual', '2.4ghz', '5ghz', '6ghz' or 'multi'.

bands

dictionary

Settings related to all bands.

enabled

list / elements=string

List of enabled bands. Can include "2.4","5", "6", "disabled".

bandSteeringEnabled

boolean

Steers client to most open band between 2.4 GHz and 5 GHz. Can be either true or false.

Choices:

minBitrate

float

Sets min bitrate (Mbps) of this SSID. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'.

rfProfileId

string

RfProfileId path parameter. Rf profile ID.

sixGhzSettings

dictionary

Settings related to 6Ghz band. Only applicable to networks with 6Ghz capable APs.

channelWidth

string

Sets channel width (MHz) for 6Ghz band. Can be one of '0', '20', '40', '80' or '160'. Defaults to 0.

maxPower

integer

Sets max power (dBm) of 6Ghz band. Can be integer between 2 and 30. Defaults to 30.

minBitrate

integer

Sets min bitrate (Mbps) of 6Ghz band. Can be one of '6', '9', '12', '18', '24', '36', '48' or '54'. Defaults to 12.

minPower

integer

Sets min power (dBm) of 6Ghz band. Can be integer between 2 and 30. Defaults to 8.

rxsop

integer

The RX-SOP level controls the sensitivity of the radio. It is strongly recommended to use RX-SOP only after consulting a wireless expert. RX-SOP can be configured in the range of -65 to -95 (dBm). A value of null will reset this to the default.

validAutoChannels

list / elements=integer

Sets valid auto channels for 6Ghz band. Can be one of '1', '5', '9', '13', '17', '21', '25', '29', '33', '37', '41', '45', '49', '53', '57', '61', '65', '69', '73', '77', '81', '85', '89', '93', '97', '101', '105', '109', '113', '117', '121', '125', '129', '133', '137', '141', '145', '149', '153', '157', '161', '165', '169', '173', '177', '181', '185', '189', '193', '197', '201', '205', '209', '213', '217', '221', '225', '229' or '233'.Defaults to 1, 5, 9, 13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 53, 57, 61, 65, 69, 73, 77, 81, 85, 89, 93, 97, 101, 105, 109, 113, 117, 121, 125, 129, 133, 137, 141, 145, 149, 153, 157, 161, 165, 169, 173, 177, 181, 185, 189, 193, 197, 201, 205, 209, 213, 217, 221, 225, 229, 233.

transmission

dictionary

Settings related to radio transmission.

enabled

boolean

Toggle for radio transmission. When false, radios will not transmit at all.

Choices:

twoFourGhzSettings

dictionary

Settings related to 2.4Ghz band.

axEnabled

boolean

Determines whether ax radio on 2.4Ghz band is on or off. Can be either true or false. If false, we highly recommend disabling band steering. Defaults to true.

Choices:

maxPower

integer

Sets max power (dBm) of 2.4Ghz band. Can be integer between 2 and 30. Defaults to 30.

minBitrate

float

Sets min bitrate (Mbps) of 2.4Ghz band. Can be one of '1', '2', '5.5', '6', '9', '11', '12', '18', '24', '36', '48' or '54'. Defaults to 11.

minPower

integer

Sets min power (dBm) of 2.4Ghz band. Can be integer between 2 and 30. Defaults to 5.

rxsop

integer

The RX-SOP level controls the sensitivity of the radio. It is strongly recommended to use RX-SOP only after consulting a wireless expert. RX-SOP can be configured in the range of -65 to -95 (dBm). A value of null will reset this to the default.

validAutoChannels

list / elements=integer

Sets valid auto channels for 2.4Ghz band. Can be one of '1', '6' or '11'. Defaults to 1, 6, 11.

Notes

Note

  • SDK Method used are wireless.Wireless.create_network_wireless_rf_profile, wireless.Wireless.delete_network_wireless_rf_profile, wireless.Wireless.update_network_wireless_rf_profile,

  • Paths used are post /networks/{networkId}/wireless/rfProfiles, delete /networks/{networkId}/wireless/rfProfiles/{rfProfileId}, put /networks/{networkId}/wireless/rfProfiles/{rfProfileId},

  • Does not support check_mode

  • The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

  • The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

See Also

See also

Cisco Meraki documentation for wireless createNetworkWirelessRfProfile

Complete reference of the createNetworkWirelessRfProfile API.

Cisco Meraki documentation for wireless deleteNetworkWirelessRfProfile

Complete reference of the deleteNetworkWirelessRfProfile API.

Cisco Meraki documentation for wireless updateNetworkWirelessRfProfile

Complete reference of the updateNetworkWirelessRfProfile API.

Examples

- name: Create
  cisco.meraki.networks_wireless_rf_profiles:
    meraki_api_key: "{{meraki_api_key}}"
    meraki_base_url: "{{meraki_base_url}}"
    meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
    meraki_certificate_path: "{{meraki_certificate_path}}"
    meraki_requests_proxy: "{{meraki_requests_proxy}}"
    meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
    meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
    meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
    meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
    meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
    meraki_maximum_retries: "{{meraki_maximum_retries}}"
    meraki_output_log: "{{meraki_output_log}}"
    meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
    meraki_log_path: "{{meraki_log_path}}"
    meraki_print_console: "{{meraki_print_console}}"
    meraki_suppress_logging: "{{meraki_suppress_logging}}"
    meraki_simulate: "{{meraki_simulate}}"
    meraki_be_geo_id: "{{meraki_be_geo_id}}"
    meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
    meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
    state: present
    apBandSettings:
      bandOperationMode: dual
      bandSteeringEnabled: true
      bands:
        enabled:
        - '2.4'
        - '5'
    bandSelectionType: ap
    clientBalancingEnabled: true
    fiveGhzSettings:
      channelWidth: auto
      maxPower: 30
      minBitrate: 12
      minPower: 8
      rxsop: -95
      validAutoChannels:
      - 36
      - 40
      - 44
      - 48
      - 52
      - 56
      - 60
      - 64
      - 100
      - 104
      - 108
      - 112
      - 116
      - 120
      - 124
      - 128
      - 132
      - 136
      - 140
      - 144
      - 149
      - 153
      - 157
      - 161
      - 165
    flexRadios:
      byModel:
      - bands:
        - '5'
        model: MR34
    minBitrateType: band
    name: Main Office
    networkId: string
    perSsidSettings:
      '0':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '1':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '10':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '11':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '12':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '13':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '14':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '2':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '3':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '4':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '5':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '6':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '7':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '8':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '9':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
    sixGhzSettings:
      channelWidth: auto
      maxPower: 30
      minBitrate: 12
      minPower: 8
      rxsop: -95
      validAutoChannels:
      - 1
      - 5
      - 9
      - 13
      - 17
      - 21
      - 25
      - 29
      - 33
      - 37
      - 41
      - 45
      - 49
      - 53
      - 57
      - 61
      - 65
      - 69
      - 73
      - 77
      - 81
      - 85
      - 89
      - 93
      - 97
      - 101
      - 105
      - 109
      - 113
      - 117
      - 121
      - 125
      - 129
      - 133
      - 137
      - 141
      - 145
      - 149
      - 153
      - 157
      - 161
      - 165
      - 169
      - 173
      - 177
      - 181
      - 185
      - 189
      - 193
      - 197
      - 201
      - 205
      - 209
      - 213
      - 217
      - 221
      - 225
      - 229
      - 233
    transmission:
      enabled: true
    twoFourGhzSettings:
      axEnabled: true
      maxPower: 30
      minBitrate: 11.0
      minPower: 5
      rxsop: -95
      validAutoChannels:
      - 1
      - 6
      - 11

- name: Delete by id
  cisco.meraki.networks_wireless_rf_profiles:
    meraki_api_key: "{{meraki_api_key}}"
    meraki_base_url: "{{meraki_base_url}}"
    meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
    meraki_certificate_path: "{{meraki_certificate_path}}"
    meraki_requests_proxy: "{{meraki_requests_proxy}}"
    meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
    meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
    meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
    meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
    meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
    meraki_maximum_retries: "{{meraki_maximum_retries}}"
    meraki_output_log: "{{meraki_output_log}}"
    meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
    meraki_log_path: "{{meraki_log_path}}"
    meraki_print_console: "{{meraki_print_console}}"
    meraki_suppress_logging: "{{meraki_suppress_logging}}"
    meraki_simulate: "{{meraki_simulate}}"
    meraki_be_geo_id: "{{meraki_be_geo_id}}"
    meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
    meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
    state: absent
    networkId: string
    rfProfileId: string

- name: Update by id
  cisco.meraki.networks_wireless_rf_profiles:
    meraki_api_key: "{{meraki_api_key}}"
    meraki_base_url: "{{meraki_base_url}}"
    meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
    meraki_certificate_path: "{{meraki_certificate_path}}"
    meraki_requests_proxy: "{{meraki_requests_proxy}}"
    meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
    meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
    meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
    meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
    meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
    meraki_maximum_retries: "{{meraki_maximum_retries}}"
    meraki_output_log: "{{meraki_output_log}}"
    meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
    meraki_log_path: "{{meraki_log_path}}"
    meraki_print_console: "{{meraki_print_console}}"
    meraki_suppress_logging: "{{meraki_suppress_logging}}"
    meraki_simulate: "{{meraki_simulate}}"
    meraki_be_geo_id: "{{meraki_be_geo_id}}"
    meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
    meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
    state: present
    apBandSettings:
      bandOperationMode: dual
      bandSteeringEnabled: true
      bands:
        enabled:
        - '2.4'
        - '5'
    bandSelectionType: ap
    clientBalancingEnabled: true
    fiveGhzSettings:
      channelWidth: auto
      maxPower: 30
      minBitrate: 12
      minPower: 8
      rxsop: -95
      validAutoChannels:
      - 36
      - 40
      - 44
      - 48
      - 52
      - 56
      - 60
      - 64
      - 100
      - 104
      - 108
      - 112
      - 116
      - 120
      - 124
      - 128
      - 132
      - 136
      - 140
      - 144
      - 149
      - 153
      - 157
      - 161
      - 165
    flexRadios:
      byModel:
      - bands:
        - '5'
        model: MR34
    minBitrateType: band
    name: '1234'
    networkId: string
    perSsidSettings:
      '0':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '1':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '10':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '11':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '12':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '13':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '14':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '2':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '3':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '4':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '5':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '6':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '7':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '8':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
      '9':
        bandOperationMode: dual
        bandSteeringEnabled: true
        bands:
          enabled:
          - '2.4'
          - '5'
        minBitrate: 11.0
    rfProfileId: string
    sixGhzSettings:
      channelWidth: auto
      maxPower: 30
      minBitrate: 12
      minPower: 8
      rxsop: -95
      validAutoChannels:
      - 1
      - 5
      - 9
      - 13
      - 17
      - 21
      - 25
      - 29
      - 33
      - 37
      - 41
      - 45
      - 49
      - 53
      - 57
      - 61
      - 65
      - 69
      - 73
      - 77
      - 81
      - 85
      - 89
      - 93
      - 97
      - 101
      - 105
      - 109
      - 113
      - 117
      - 121
      - 125
      - 129
      - 133
      - 137
      - 141
      - 145
      - 149
      - 153
      - 157
      - 161
      - 165
      - 169
      - 173
      - 177
      - 181
      - 185
      - 189
      - 193
      - 197
      - 201
      - 205
      - 209
      - 213
      - 217
      - 221
      - 225
      - 229
      - 233
    transmission:
      enabled: true
    twoFourGhzSettings:
      axEnabled: true
      maxPower: 30
      minBitrate: 11.0
      minPower: 5
      rxsop: -95
      validAutoChannels:
      - 1
      - 6
      - 11

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

meraki_response

dictionary

A dictionary or list with the response returned by the Cisco Meraki Python SDK

Returned: always

Sample: :ansible-rv-sample-value:`{"apBandSettings": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}}, "bandSelectionType": "string", "clientBalancingEnabled": true, "fiveGhzSettings": {"channelWidth": "string", "maxPower": 0, "minBitrate": 0, "minPower": 0, "rxsop": 0, "validAutoChannels": [0]}, "id": "string", "minBitrateType": "string", "name": "string", "networkId": "string", "perSsidSettings": {"0": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "1": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "10": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "11": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "12": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "13": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "14": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "2": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "3": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "4": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "5": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "6": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "7": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "8": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}, "9": {"bandOperationMode": "string", "bandSteeringEnabled": true, "bands": {"enabled": ["string"]}, "minBitrate": 0, "name": "string"}}, "sixGhzSettings": {"channelWidth": "string", "maxPower": 0, "minBitrate": 0, "minPower": 0, "rxsop": 0, "validAutoChannels": [0]}, "transmission": {"enabled": true}, "twoFourGhzSettings": {"axEnabled": true, "maxPower": 0, "minBitrate": 0, "minPower": 0, "rxsop": 0, "validAutoChannels": [0]}}`

Authors

  • Francisco Munoz (@fmunoz)